Fujitsu BX900 S1 User Manual
BX900 S1
Operating Manual
135
Hot-plug components
8.4.2
Replacing the power supply unit
If a power supply unit fails, an error message is output on the LocalView display.
The defective power supply unit can be replaced during operation.
The defective power supply unit can be replaced during operation.
V
CAUTION!
CAUTION! The power supply unit can be very hot!
Ê
Check the power supply unit LEDs on the back of the system unit (see
) to find out which unit is defective.
Ê
First unplug the power cable of the defective power supply unit from the
mains.
mains.
Ê
Unplug the power cable from the insulated socket of the defective power
supply unit.
supply unit.
Figure 51: Open release lever
Ê
Unlock the locking lever (1) and open the release lever (2).
2
1