Fujitsu BX960 S1 User Manual
BX960 S1
Operating Manual
35
Installing the Server Blade in the system unit
Removing dummy modules
Any unused slots on the front of the system unit are fitted with appropriate
dummy modules to comply with electromagnetic compatibility (EMC)
regulations and to ensure sufficient cooling of the system components.
dummy modules to comply with electromagnetic compatibility (EMC)
regulations and to ensure sufficient cooling of the system components.
To add a BX960 S1 server blade, you must first remove dummy modules from
the relevant slots.
the relevant slots.
Figure 2: Removing the server blade dummy module
Ê
Pull up the handle of the dummy module (arrow) to unlock it.
Ê
Pull the dummy module out of the slot.
V
CAUTION!
Keep the dummy module for future use. If you remove a server blade and
do not replace it with a new one, you must install a dummy module to
comply with the regulations regarding electromagnetic compatibility and
to ensure sufficient cooling of the system components.
do not replace it with a new one, you must install a dummy module to
comply with the regulations regarding electromagnetic compatibility and
to ensure sufficient cooling of the system components.