Fujitsu BX960 S1 User Manual

BX960 S1

Operating Manual

45

V

If you switch the server blade on and flickering stripes appear on the 
connected monitor, switch the server blade off again immediately (see 

).

The On/Off button does not disconnect the device from the mains. To 
fully disconnect the device from the mains, you must remove the server 
blade from the system unit or switch off the system unit and unplug the 
power plug(s).

The system unit is switched on and the power-on indicator (item 8 in 

) is flashing green. 

The server blade can be switched on and off as follows:

–

To switch the server blade on, press the On/Off button on the server blade 
(item 8 in 

To switch the server blade off, hold down the On/Off button on the 
server blade (item 8 in 

) for 4 seconds.

The server blade is switched on and off at the times defined in the 

.

–

Once a server blade has been switched on, it will switch itself on again 
automatically after a power failure (irrespective of the setting in the BIOS 
Setup).

I

You can also switch the server blade on and off via the system unit 
control panel or via the Web interface of the ServerView Management 
Blade. Detailed information is provided in the manual "PRIMERGY 
BX900 Blade Server Systems ServerView Management Blade S1 User 
Interface Description".