Fujitsu TX200 S6 User Manual

116

Operating Manual

 TX200 

S6

Serial 2 (9-pin) 

1 x serial RS-232-C, optional - occupies an unused 
slot

LAN / Ethernet (RJ-45)  1 x Gbit/s Ethernet

Service LAN (RJ45)

1 x dedicated service LAN connector for iRMC S2 
(10/100 Mbit/s) Service LAN traffic can be switched 
to shared onboard Gbit LAN port

RAID Controller

Modular RAID 0/1 controller with "Integrated 
Mirroring Enhanced" (SAS IME) for SAS1.0.
RAID levels 0, 1 and 1E are supported for internal 
hard disk drive configurations. For the Japanese 
market only RAID level 1 is supported for internal 
hard disk drive configurations.

Modular RAID 0/1 controller with “MegaRAID 
functionality” (SAS MegaRAID) for SAS1.0 and 
SAS2.0. RAID levels 0, 1,10 and 1E are supported 
for internal hard disk drive configurations.

Modular RAID 5/6 controller with "MegaRAID 
functionality" (SAS MegaRAID) for SAS1.0 and 
SAS2.0. RAID levels 0, 1, 10, 1E, 5, 50, 6 and 60 are 
supported for internal hard disk drive configurations.

SATA Controller 

ICH10R, 6-port SATA (4x for internal hard disks, 2x 
for accessible drives)

SATA Controller type 
notes

On board SATA controller supports RAID levels 
0,1,10

Remote Management 
Controller 

Integrated Remote Management Controller 
(iRMC S2, 32 MB attached memory incl. graphics 
controller), IPMI 2.0 compatible

Trusted Platform 
Module (TPM)

Infineon TCG V1.2 compliant (option)