Fujitsu TX200 S6 User Manual

16

Operating Manual

 TX200 

S6

The server is shipped with one of the following drive cages:

–

For up to four 3.5-inch SAS/SATA hard disk drives:

Up to four SAS/SATA HDD modules can be used in the drive cage. Each 
HDD module can accommodate a SAS/SATA hard disk drive with a 
maximum height of 1 inch. The module is connected to the SAS/SATA 
backplane wirelessly. This allows HDD modules to be plugged in and pulled 
out easily.

As an option, a hard disk extension box (with a maximum of two SAS/SATA 
HDD modules) can be installed (see section 

).

I

Up to four SATA hard disk drives are controlled by the onboard SATA 
controller. An additional SAS/SATA RAIDcontroller must be installed 
to control additional SATA hard disk drives or SAS hard disk drives.

–

For up to eight 2.5-inch SAS/SATA hard disk drives:

Up to eight SAS/SATA HDD modules can be used in the drive cage. Each 
HDD module can accommodate an SAS/SATA hard disk drive with a 2.5-
inch format. The modules are connected to the SAS/SATA backplane 
wirelessly. This allows HDD modules to be plugged in or pulled out easily.

As an option, a hard disk extension box (with a maximum of eight SAS/SATA 
HDD modules) can also be installed (see section 

).

I

Up to eight SAS/SATA hard disk drives are controlled by the 
SAS/SATA RAID controller already installed.The hard disk extension 
box for 2.5-inch SAS hard disk drives requires an additional 
SAS/SATA RAID controller.

If the server has the corresponding RAID configuration, HDD modules can also 
be replaced during operation.