Fujitsu TX200 S6 User Manual

42

Operating Manual

 TX200 

S6

V

●

For safety reasons, at least two people are required to install the 
server in the rack because of its weight and size. 

(For the Japanese market, please refer to "

安全上の注意およびその

他の重要情報

".)

●

Never lift the server into the rack using the handles on the front panel.

●

When connecting and disconnecting cables, observe the relevant 
instructions in the "Important Information" chapter of the technical 
manual for the corresponding rack. The technical manual is supplied 
with the corresponding rack.

●

When installing the rack, make sure that the anti-tilt mechanism is 
correctly fitted.

●

For safety reasons, no more than one unit may be removed from the 
rack at any one time during installation and maintenance work.

●

If several units are simultaneously removed from the rack, there is a 
risk that the rack could tip over.

●

The rack must be connected to the power supply by an authorized 
specialist (electrician).

●

If the server is integrated into an installation that draws power from an 
industrial power supply network with an IEC309 type connector, the 
power supply's fuse protection must comply with the requirements for 
non-industrial power supply networks for the type A connector.