Fujitsu TX200 S6 User Manual

60

Operating Manual

 TX200 

S6

Ê

Connect the monitor to the video connector of the server (see figure

).

Ê

Connect the power cable of the monitor to a grounded mains outlet of the in-
house mains and/or to the mains socket strip of the rack.

V

The rated current for the monitor is indicated on the technical data label 
on the monitor or in the operating manual for the monitor.

The server is either equipped with a standard power supply unit or with one or 
two hot-plug power supply units.

As an option, the standard power supply unit can be replaced with a hot-plug 
power supply unit. A second hot-plug power supply unit can be added to ensure 
a redundant power supply. If a defect occurs in one power supply unit, the other 
power supply unit ensures unimpaired further operation. 

V

The server is automatically set to a mains voltage in the range 100 V -

240 V. You may only operate the server if its rated voltage range 

corresponds to the local mains voltage.

I

A phase redundancy in the power supply of the server can be set up if 
two hot-plug power supply units are installed. 

In this case the two power supply units are directly connected either to 
two different phases or two different power circuits of the in-house mains.