Fujitsu TX300 User Manual

TX300 S6

Options Guide

17

V

 

●

The actions described in this manual shall be performed by technical 
specialists. A technical specialist is a person who is trained to install 
the server including hardware and software.

●

Repairs to the device that do not relate to CSS failures shall be 
performed by service personnel. Please note that unauthorized 
interference with the system will void the warranty and exempt the 
manufacturer from all liability.

●

Any failure to observe the guidelines in this manual, and any improper 
repairs could expose the user to risks (electric shock, energy 
hazards, fire hazards) or damage the equipment. 

Ê

First of all, carefully read the safety instructions in the chapter 

Ê

Make sure that all necessary manuals (see the section 

) are available; print the PDF files if required. Most 

importantly, you will need the Operating Manual for the server and the 
Technical Manual for the system board.

Ê

Shut the server down correctly, switch it off, disconnect the power cords and 
open the server as described in the chapter 

.

Ê

Carry out the expansion or upgrade of your server as described in the 
pertinent chapter.

I

 

Installation and removal of the hot-plug components are described in 
the Operating Manual.

Ê

Close the server, connect it to the power outlet, and switch it on as described 
in the chapter 

Ê

Start the operating system and make the appropriate configuration if 
necessary (see the Operating Manual).

I 

For the latest information on optional products provided for the 

TX300 S6 see the configurator of this server: