Fujitsu TX300 User Manual

20

Options Guide

 TX300 S6

Safety instructions

V 

●

During installation and before operating the device, observe the 
instructions on environmental conditions for your device.

●

If the device is brought in from a cold environment, condensation may 
form both inside and on the outside of the device. 

Wait until the device has acclimatized to room temperature and is 
absolutely dry before starting it up. Material damage may be caused 
to the device if this requirement is not observed.

●

Transport the device only in the original packaging or in packaging 
that protects it from knocks and jolts.

V

 

●

This unit should not be operated in ambient temperatures above 
35 °C.

●

If the unit is integrated into an installation that draws power from an 
industrial power supply network with an IEC309 connector, the power 
supply's fuse protection must comply with the requirements for non-
industrial power supply networks for type A connectors.

●

The unit automatically adjusts itself to a mains voltage in a range of 
100 V - 240 V. Ensure that the local mains voltage lies within these 
limits.

●

This device must only be connected to properly grounded power 
outlets or insulated sockets of the rack's internal power supply with 
tested and approved power cords.

●

Ensure that the device is connected to a properly grounded power 
outlet close to the device.