Fujitsu TX300 User Manual

TX300 S6

Options Guide

37

V 

●

Before installing/removing memory to/from the server, turn off the 
server, all peripheral devices, and any other connected devices. Also 
unplug all power cords from the power outlet. Failure to do so can 
cause electric shock. 

●

A memory module consists of parts that are very vulnerable to 
damage by static electricity, and can easily be damaged by static 
electricity in the human body. Before handling memory modules, first 
touch a metal part of the server to discharge static electricity. 

●

Do not touch the circuitry on boards and soldered parts. Hold the 
metallic areas or the edge of the circuit boards. 

●

Do not install unauthorized third party memory modules. Doing so 
may cause electric shock, a fire, or failures. 

●

Wait for a sufficient period of time after server shutdown before 
installing or removing memory modules. Failure to do so may cause 
burns. When installing or removing memory modules, make sure to 
remove the screws at the specified points only. Failure to do so may 
cause injury. It may also cause failures. 

●

Touch only the specified part of the printed circuit board. Failure to do 
so may cause injury. It may also cause failures. 

●

Do not insert and remove memory modules repeatedly. Doing so may 
cause failures. 

●

If the memory module has not been correctly inserted, it may cause 
a fire. Insert the memory module with attention to its direction. 

●

If a memory module is installed and you pull the securing clips 
strongly outward, the memory module pops up. Doing so may cause 
a device failure.

●

Follow the safety instructions in the