Fujitsu TX300 User Manual

58

Options Guide

 TX300 S6

Accessible drives and LSD/LSP

Figure 28: Attaching the EasyClick rails - example: DVD drive

Ê

Screw the EasyClick rails onto either side of the new 5.25-inch drive using 
two M3x4.5mm screws.

Use the first hole in each lower row of holes as shown in the figure.

I 

Keep the remaining screws for future use. The different drives are 

fastened using different screws. 

Please use the screws which are provided with the packaging 
contents of the tape drive.

Ê

Push the new drive about halfway into the bay.

Ê

Connect the data cable to the accessible drive (see the cabling plans in the 
Appendix).

Ê

Connect the power cable to the accessible drive (see the cabling plans in the 
Appendix).

Ê

Push the drive fully into the bay until the EasyClick rails lock in place.

Ê

Attach the front cover or the rack front cover as described in the 

 or in the 

.

Ê

Close the server, connect it to the power outlet, and switch it on as described 
in the 

.