Fujitsu TX300 User Manual

68

Options Guide

 TX300 S6

Accessible drives and LSD/LSP

In the base units two 5.25-inch bays for accessible drives can be used to install 
an HDD extension box.

Two variants of the HDD extension box are available:

●

HDD extension box for 3.5-inch HDD modules (Multibay 2):

Multibay 2 contains one bay for a LSP or LSD, one bay for a DVD drive, and 
two bays for 3.5-inch HDD modules.

●

HDD extension box for 2.5-inch HDD modules:

This HDD extension box contains eight bays for 2.5-inch HDD modules.

The HDD extension box is supplied without EasyClick rails. You need 4 M3 
screws. Before installing a new HDD extension box you must therefore remove 
the EasyClick rails from one dummy cover and mount two EasyClick rails on the 
HDD extension box.

Ê

Open the server and remove the the front cover or the rack front cover as 
described in the 

Ê

Remove the dummy covers from the required 5.25-inch bays (see 

).

Ê

Detach the EasyClick rails from a dummy cover by removing the four screws 
on each side (see 

).

I 

Note that there are two M3 screws and two UNC screws on each side 

(see 

).

V 

Keep the dummy covers for future use. If you remove the HDD extension 
box again and do not replace it with a new one, the dummy covers must 
be reinstalled to comply with EMC regulations and to satisfy cooling 
requirements and fire protection measures.