Fujitsu TX150 S3 User Manual
U41604-Z156-1-76
Options Guide
39
9
External SCSI interface
V
CAUTION!
Observe the safety instructions in the chapter “Safety notes” on page 7
et seqq. .
et seqq. .
If the internal hard disks are connected via a PCI RAID controller, one channel
of the on-board controller can also be made available for connecting a periphe-
ral cabinet SX10 via an external SCSI interface.
of the on-board controller can also be made available for connecting a periphe-
ral cabinet SX10 via an external SCSI interface.
9.1
Installing the external SCSI interface
Ê
Open the server as described in the chapter “Preparation” on page 13 et
seqq. .
seqq. .
Figure 28: External SCSI interface
Ê
Remove the rear cover of PCI slot 7 and insert the slot cover of the external
SCSI interface in this slot as described in section “PCI slot assembling” on
page 34.
SCSI interface in this slot as described in section “PCI slot assembling” on
page 34.
Ê
Attach the external SCSI interface’s connector to the SCSI channel of the
onboard SCSI controller on the system board (connector SCSI U320).
onboard SCSI controller on the system board (connector SCSI U320).
Ê
Close the server, connect it to the power outlet, and switch it on as described
in the chapter “Completion” on page 59 et seqq. .
in the chapter “Completion” on page 59 et seqq. .