Fujitsu Cloud Edition V3.1.0 User Manual
Allocated L-Server
Specify an L-Server when sharing the disk resources.
Disk name
Specify the name of the disk to be found.
-
Begins with
Specify when searching for disks whose names begin with the specified string.
-
Includes
Specify when searching for disks whose names include the specified string.
16.2.4 [Network] Tab
Specify the following items.
NIC/Network
Configure the network to connect with the NIC used in the L-Server. Clicking <Add> displays the [Add a Network] dialog. Select a
network resource to connect with the NIC.
network resource to connect with the NIC.
The number of NICs that can be configured is 1 to 32.
NICs
Select the NIC to use in the L-Server from the selection list. When adding a new NIC or NIC group, select the number displayed
as "(Undefined)" from the list. When selecting an already defined NIC, a network resource is added.
as "(Undefined)" from the list. When selecting an already defined NIC, a network resource is added.
Setup redundant NIC
When performing NIC redundancy, check the [Setup redundant NIC] checkbox, and select another NIC pair from the list to make
redundant.
redundant.
Network
Select a network resource to connect.
Clicking <Delete> deletes the selected network.
Clicking <Change> displays the [Select a Network Resource] dialog.
If <OK> is clicked while a network resource is selected, the network resource to connect is modified.
Clicking <Change> displays the [Select a Network Resource] dialog.
If <OK> is clicked while a network resource is selected, the network resource to connect is modified.
IP address (Optional)
Specify the IP address to allocate to the L-Server. This should be entered for direct specification of the IP address to be allocated to
the L-Server. The specified IP address will be converted to the IP address of the physical server during creation of the L-Server.
the L-Server. The specified IP address will be converted to the IP address of the physical server during creation of the L-Server.
Note
If a LUN created beforehand is used to create a physical L-Server, specify the IP address of the OS stored in the LUN.
If an agent has already been installed in the LUN created beforehand, and the IP address of the manager has been changed, the following
procedures need to be performed after creating the physical L-Server.
If an agent has already been installed in the LUN created beforehand, and the IP address of the manager has been changed, the following
procedures need to be performed after creating the physical L-Server.
1.
Initialize the file where the agent's SSL certificate data is stored.
For details, refer to "5.5 rcxadm certctl" in the "Reference Guide (Command/XML) CE".
2.
Modify the IP address of the admin LAN of the manager registered in the agent.
For details, refer to "5.3 rcxadm agtctl" in the "Reference Guide (Command/XML) CE".
3.
Reboot the physical L-Server.
Example
- 177 -