Fujitsu Cloud Edition V3.1.0 User Manual
4.
After performing the configuration, close the web browser.
Log in to Resource Orchestrator again using a web browser, and the console screen can then be started from the ROR console.
-
In cases where the following VM products are used for a virtual L-Server, starting the ROR console turns the L-Server "ON" when
the selected L-Server was "OFF".
the selected L-Server was "OFF".
-
VMware vSphere 4.0
-
VMware vSphere 4.1
-
For physical L-Servers, when opening the L-Server console screen at the second time or later, a window for iRMC management may
be opened instead of the console screen.
be opened instead of the console screen.
If an iRMC management screen is displayed, close that screen and then start the console screen again.
For details, refer to "3.4 When Opening the Physical L-Server Console Screen, the iRMC Management Window may be Opened." in
"Troubleshooting".
"Troubleshooting".
17.4 Deleting an L-Server
This section explains how to delete an L-Server.
To delete an L-Server the L-Server must be stopped.
If an L-Server is deleted, the resources allocated to the L-Server are automatically made available for reuse.
1.
Right-click the target L-Server in the orchestration tree, and select [Delete] from the popup menu.
The [Delete an L-Server] dialog is displayed.
2.
Click <OK>.
The target L-Server is deleted.
Note
-
When deleting an L-Server, log off from the ETERNUSmgr of ETERNUS storage registered on ESC.
-
When operating NetApp storage in cluster environments and operating a partial system due to system trouble, perform the operation
after recovering the NetApp storage and returning the system to cluster operation.
after recovering the NetApp storage and returning the system to cluster operation.
-
When the disk resource is a LUN created in advance, a LUN for iSCSI boot, or a disk resource for virtual L-Servers, it is recommended
to delete the data on the disk, as the data is not deleted when deleting the L-Server to which the disk resource is allocated. For details
on how to delete data on the disks, refer to the cautionary notes of "
to delete the data on the disk, as the data is not deleted when deleting the L-Server to which the disk resource is allocated. For details
on how to delete data on the disks, refer to the cautionary notes of "
-
If they are disk resources that were created with dynamic LUN mirroring, the disk resources on the local site and on the remote site
are deleted simultaneously when the L-Server is deleted.
are deleted simultaneously when the L-Server is deleted.
-
When deleting a virtual L-Server, the target L-Server will enter unknown status, and a warning message may be displayed. When the
L-Server has been deleted, the warning message will disappear, so no corrective action is necessary.
L-Server has been deleted, the warning message will disappear, so no corrective action is necessary.
From the command-line, execute rcxadm lserver delete.
For details on the rcxadm lserver delete command, refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE".
For details on the rcxadm lserver delete command, refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE".
17.5 Cloning Image Operations
This section explains how to collect and delete cloning images.
[Solaris Containers]
Cloning Images cannot be operated from the ROR console.
Cloning Images cannot be operated from the ROR console.
- 209 -