Fujitsu Cloud Edition V3.1.0 User Manual

The status panel displays a summary of resources statuses (including resources other than PRIMERGY BX servers).

When a problem occurs in the system, a red or yellow light icon starts blinking on the left side of the status panel.
Clicking the light icon changes its color back to gray.
The table below shows the status and meaning associated with each light icon.

 

Table 4.1 Light Icons

Icon

Color

Status

Meaning

Gray (not lit)

Normal

No errors or warnings have been detected in the system.

Yellow
(blinking)

Warning

A warning has been detected in the system.

Red
(blinking)

Error

An error has been detected in the system.

 

 Information

When the light icon blinks, it means that a warning or an error has been detected. Check the location of the problem from the chassis or
blade panel.
If BladeViewer shows no resources with a warning or error status in either the chassis panel or blade panel, switch to the ROR console
and check the event log to identify the cause of the problem.

To the right of the light icon, BladeViewer shows the number of servers with an "error", "warning", "normal", and "stop" status.

 

Table 4.2 Displaying the Server Icon and the Number of Units

Icon and number of units

Meaning

N

 (*)

Server and number of units

* Note: 

N

 is the number of servers.

 

Table 4.3 Status Icons

Icon

Status

Meaning

None

Normal

The resource can be used normally.

Warning

An error occurred, however the resource can be used.
Alternatively, the status of some resources cannot be obtained.

Error

A fault or error occurred, therefore the resource cannot be used.

Stop

The resource is stopped, therefore it cannot be used.

The chassis panel displays the statuses of each registered chassis.

 

- 9 -