Fujitsu Cloud Edition V3.1.0 User Manual
In the following cases, the "L-Server for Server/Storage Management" is used.
-
", and the device paths for all disks that have been allocated to the virtual
machine are found in the following list
[VMware]
-
SCSI:0:1 - SCSI:0:6
-
SCSI:0:8 - SCSI:0:14
-
SCSI:1:0 - SCSI:1:6
-
SCSI:1:8 - SCSI:1:14 AM
-
SCSI:2:0 - SCSI:2:6
-
SCSI:2:8 - SCSI:2:14 AM
-
SCSI:3:0 - SCSI:3:6
-
SCSI:3:8 - SCSI:3:14 AM
[Hyper-V]
-
SCSI:0:1 - SCSI:0:14
-
SCSI:1:0 - SCSI:1:14 AM
-
SCSI:2:0 - SCSI:2:14 AM
-
SCSI:3:0 - SCSI:3:14 AM
For virtual machines on VM host of VMware which is not managed by VM management software, power operations (starting,
stopping or restarting) and modification of basic information (label/comment configurations) can be performed.
stopping or restarting) and modification of basic information (label/comment configurations) can be performed.
*2: Solaris Containers are not supported. [Solaris Containers]
*3: Datastores must be installed on a shared disk.
*4: When CPU performance and memory size have been specified, the settings cannot be changed into "Unlimited".
*5: For system disks, use SCSI:0:0 [VMware] or IDE:0:0 [Hyper-V]. If SCSI:0:0 [VMware] or IDE:0:0 [Hyper-V] is not used for the
system disk, the L-Server creation process that accompanies cloning image deployment may fail. For Hyper-V, datastore must be installed
on a shared disk.
[VMware]
When the virtual machine linked to the target L-Server includes Raw Device Mapping (RDM) disks, the target disks are treated as virtual
disks and the image will be collected.
[Hyper-V]
When the virtual machine lined to the target L-Server includes Pass-through Disks, images cannot be collected.
When the virtual machine linked to the target L-Server includes difference disks, the image will be collected with the difference disks
included.
*3: Datastores must be installed on a shared disk.
*4: When CPU performance and memory size have been specified, the settings cannot be changed into "Unlimited".
*5: For system disks, use SCSI:0:0 [VMware] or IDE:0:0 [Hyper-V]. If SCSI:0:0 [VMware] or IDE:0:0 [Hyper-V] is not used for the
system disk, the L-Server creation process that accompanies cloning image deployment may fail. For Hyper-V, datastore must be installed
on a shared disk.
[VMware]
When the virtual machine linked to the target L-Server includes Raw Device Mapping (RDM) disks, the target disks are treated as virtual
disks and the image will be collected.
[Hyper-V]
When the virtual machine lined to the target L-Server includes Pass-through Disks, images cannot be collected.
When the virtual machine linked to the target L-Server includes difference disks, the image will be collected with the difference disks
included.
18.3 Prerequisites
When linking a configured physical server to a physical L-Server, or when linking a configured virtual machine to a virtual L-Server, the
available management scope varies depending on the configured hardware and software environments.
available management scope varies depending on the configured hardware and software environments.
18.3.1 Manageable Hardware
When using the hardware listed in "Table 2.64 Required Hardware" in "2.5 Hardware Environment" in the "Design Guide CE", only
servers can be managed.
servers can be managed.
18.3.2 Manageable Servers
For Physical Servers
-
Connected with a SAN.
- 231 -