Fujitsu Cloud Edition V3.1.0 User Manual
Attribute Information
Admin LAN
Whether it is to be used as an admin LAN is displayed.
-
When used as an admin LAN
"yes" is displayed.
-
When not used as an admin LAN
"no" is displayed.
iSCSI boot
The LAN for iSCSI boot is displayed.
use configured virtual switches.
If no virtual network, virtual switch, or port group corresponding to the network resource exists, information on whether those
resources will be automatically configured is displayed.
resources will be automatically configured is displayed.
-
If the checkbox is not selected
Configuration is performed automatically.
This option is not selected by default.
This option is not selected by default.
-
If the checkbox is selected
Resources that have already been created are configured for the network resource.
Automatically configure VLANs for the uplink ports
Whether automatic VLAN configuration for uplink ports is performed is displayed.
-
When automatic configuration is performed
"yes" is displayed.
-
When automatic configuration is not performed
"no" is displayed.
Start Address
The start address of the IP addresses to be automatically configured is displayed.
End Address
The end address of the IP addresses to be automatically configured is displayed.
Subnet address
The subnet address of the network resource is displayed.
Subnet Mask
The subnet mask of the network resource is displayed.
Gateway
The default gateway is displayed.
VLAN ID
The VLAN ID for the network resource is displayed.
Ruleset
The ruleset for the network resource is displayed.
A hyphen ("-") is displayed if the ruleset has not been set.
- 328 -