Fujitsu Cloud Edition V3.1.0 User Manual

1.

Right-click the target network resource in the orchestration tree, and select [Change Settings]-[Modify Specification] from the popup
menu.

The [Modify a network resource] dialog is displayed.

2.

Change the items you want to modify.

3.

Click <OK>.

The network resource is changed.

 

 Note

-

The default gateway address of an admin LAN resource which is the same subnet address as that of the manager cannot be changed.

When changing the number of the IP address to use after changing the subnet addresses or subnet masks, the IP address for L-Server
is also automatically changed.

As the OS configuration installed on an L-Server is not changed, manually change it to match the detailed information of the L-Server.

-

Making the following change to the network resource for which automatic configuration of VLAN on the external connection port is
specified may cause a network loop.

-

Adding another external connection port on a LAN switch blade which has been already specified as an external connection port

In this case, take action to prevent a network loop first, such as disconnecting the cable for the external connection port to be added,
before making changes to the network resource.

This section explains how to change settings of network devices.

Use the following procedure to change the settings of a registered network device:

1.

Create network configuration information for the target network device.

2.

Change the network device settings based on the network configuration information created in 1.

Create the network configuration information necessary for changing the registered network device settings.

In the following cases, it is possible to create network configuration information that can be used as input information for changes based
on its original network configuration information.

-

When the network configuration information used for registering the network device exists

-

When the network configuration information retrieved from Resource Orchestrator using the rcxadm netconfig export command exists

 

 See

-

For how to create network configuration information (XML definitions), refer to "9.4.8 When Registering Network Devices as
Resources" in the "Design Guide CE".

-

For details on the rcxadm netconfig command, refer to "3.7 rcxadm netconfig" in the "Reference Guide (Command/XML) CE".

This section explains how to change settings of a network device.

The following information can be changed:

-

Device name

- 81 -