Fujitsu RX200 S2 User Manual

154

Chapter 5 Operations after OS Installation

• The controllers of the onboard LAN and LAN cards are as follows.

5.6.2 Cautions for PG-1852/1862/188x/189xLAN Driver V8.3

■ Event Log

Once a Team is setup, multiple identical logs from the same source that starts with the following log may

be stored in the system log file of the event viewer at system start-up.

Since such event logs will be stored nonetheless even if the Teaming function is operated normally,

ignore them.

5.6.3 Teaming Function

■ Notes

When using the Teaming function, note the following points.

• You require Service Pack 2 or later for Windows 2000 Server.

• For AFT/ALB/FEC/GEC type, you can incorporate up to four LAN ports into one team and two ports

for a SFT type team.

• Once a Team is created, virtual adapters (Intel

Advanced Network Service Virtual Adapter) will be

created in the [Device Manager] and/or [Network and Dial-up Connections] of the system. Do not

disable or delete this virtual adapter from the [Device Manager] or [Network and Dial-up

Connections]. When deleting a virtual adapter, make sure to use "Intel

PROSet".

• When the Teaming function is being used, you can only use the following protocols.

• For AFT/SFT/FEC/GEC type: IP, NetBEUI, IPX (NCP), IPX (NetBIOS)

• For ALB type: IP, IPX (NCP)

• When the Teaming function is being used, you cannot use the hardware assist function of IPSEC. Do

not use this function even if the function is installed in all cards in the team.

table: Controller being used

LAN cards

Controller being used

Onboard LAN (1000BASE-T)

Intel

82547GB

PG-1852

Intel

82540EM

PG-1862

Intel

82546EB

PG-1882L/PG-1892L

Intel

82545GM

Source

iANSMiniport

Type

Warning

Description

The following adaptor link is not connected: (Adapter name)

* (Adapter name) varies depending on the OS or hardware configuration.