Fujitsu RX200 S2 User Manual

212

Chapter 8  Hardware Configuration/Utilities

8.2.3 Primary Master Submenu

Appears when [Primary Master] is selected from the [Main] menu. 

Sets the type and operating mode for the connected internal hard disk unit.

table: Items on the Primary Master Submenu

Item

Setting

Description

Type

Auto (Fixed parameter)

Sets the type of the IDE device.

Transfers Mode

Disabled (Fixed parameter)

When [Type] is set to [Auto], displays the number 
of sectors detected and transferred at once by the 
server.

LBA Translation

Disabled (Fixed parameter)

Sets whether to enable or disable the LBA (Logical 
Block Addressing: access based on logical serial 
numbers).

PIO Mode

FPIO 4/DMA 2 (Fixed 
parameter)

Sets the PIO (Programmed I/O) data transfer mode.

32 Bit I/O

Enabled (Fixed parameter)

Specifies the bus width for data transfer between 
the CPU and the IDE controller.

Ultra DMA Mode

Mode2 (Fixed parameter)

Sets the DMA (Direct Memory Access) data 
transfer mode.