Manualsbrain.com
  1. Manuals
  2. Brands
  3. Fujitsu
  4. RX200 S2
  5. User Manual

Fujitsu RX200 S2 User Manual

Download
Page of 307
48
Chapter 2  Checking before OS Installation
2.3.5 Expansion Cards Supported by ServerStart 
ServerStart supports automatic driver installation for the following expansion cards.
2.3.6 Cautions for Manual Installation
■ Cautions for Configuring a Disk Array with an Onboard SCSI Array 
Controller
Disk array configuration on the onboard SCSI array controller must be completed before the OS is 
installed. To check the onboard SCSI array controller configuration, start up the SCSI Setup Utility. For 
more details, refer to "8.3 SCSI Setup Utility" (
If a disk array is not configured on the onboard SCSI array controller, the normal SCSI configuration is 
established.
■ Free Space Required for Installation
The partition where the OS is installed must have enough free space for obtaining memory dump. For 
more details, refer to "5.1 Memory Dump/Paging File Setting" (
■ Cautions on Restarting
In the course of installation, a message appears to indicate that the setup program restarts. Wait until it 
restarts. 
 
For more details on background operations, refer to "PRIMERGY RX200 S2 Onboard SCSI RAID 
User's Guide".
table: Automatic Expansion Card Driver Installation
Name
Model
Bus
Onboard FDD/IDE
 -
 -
Onboard SCSI
 -
PCI
Onboard LAN
 -
PCI
Onboard VGA
 -
PCI
RAID Ctrl 2-Channel 128 MB w/ BBU
PG-142E3
PCI
Fibre Channel Controller
PG-FC106
PCI
LAN cards
PG-1852
PCI
PG-1862
PCI
PG-1882L
PCI
PG-1892L
PCI
SCSI Ctrl U160 lp
PG-130L
PCI