Fujitsu RX200 User Manual

 

Options Guide    

3

Preface

The system board can be upgraded with a second processor. Only processors 
of the same type may be used on the system board. The second processor must 
have the same clock frequency as the first processor.

The eight slots for the main memory are suitable for PC2-3200 DDR DIMM 
memory modules. Their organization in four memory banks, 0 to 3, allows fast 
memory access with two-way interleaving.

Memory modules must always be installed in pairs. A memory bank must 
always be fully equipped and with the same type of memory modules.

The accessible drives available are a floppy disk drive and a CD-ROM/DVD 
drive. The drives can be installed in the two top bays. The left-hand bay is 
intended for a 3.5 x 0.5 inch floppy drive or a LocalView module, while the right-
hand bay takes a 5.25 x 0.5 inch CD-ROM/DVD drive.

The LocalView module gives you the option of displaying system information 
and hardware system faults alphanumerically. This is an intelligent module with 
a microcontroller and its own memory, which functions independently of the 
server system.

The LocalView module consists of an LCD display panel and a toggle switch, 
both accommodated in a suitable mount. The mechanism used allows the LCD 
display panel to be pulled out and opened out. 

For more information on operation and display modes, see the documentation 
for the LocalView module [6].