Perle Systems SCS8C DC User Manual
157
Serial Port Profiles
When
Connect to remote system
is selected, the Rlogin window requires the name of the user who
is connecting to the host.
Configure the following parameters:
SSH Settings
The SSH settings apply when the
User Service
is set to
SSH
or the Terminal profile specifies an
SSH
connection to a host.
Configure the following parameters:
Terminal Type
Type of terminal attached to this serial port; for example, ANSI or WYSE60.
User
This name is passed on to the specified host for the Rlogin session, so that the
user is only prompted for a password.
user is only prompted for a password.
Note:
Some combinations of cipher groups are not available on FIPS firmware versions.
SSH-1 protocol is not available on FIPS firmware versions.
SSH-1 protocol is not available on FIPS firmware versions.
Terminal Type
Type of terminal attached to this serial port; for example, ANSI or WYSE60.
Verbose Mode
When enabled, displays debug messages on the terminal.
Default: Disabled
Default: Disabled
Enable
Compression
When enabled, requests compression of all data. Compression is desirable on
modem lines and other slow connections, but will only slow down things on
fast networks.
Default: Disabled
fast networks.
Default: Disabled