Perle Systems SCS8C DC User Manual

 168

Serial Port Profiles

Configure the following parameter:

Controls the sending of ASCII strings to serial device at session start as 

follows;

z

Send at Start—If configured, this string will be sent to the serial device 

on power-up of the IOLAN, or when a kill line command is issued on this 

serial port. If the "monitor DSR" or "monitor DCD" options are set, the 
string will also be sent when the monitored signal is raised.
Range: 0-127 alpha-numeric characters
Range: hexadecimal 0-FF 

z

Delay after Send - If configured, will inset a delay after the string is sent 
to the device. This delay can be used to provide the serial device with time 

to process the string before the session is initiated.
Default: 10 ms