Perle Systems SCS8C DC User Manual
266
Settings
UDP Functionality
Overview
The
UDP
tab configures the I/O UDP broadcast settings. The I/O UDP broadcast feature periodically
broadcasts the I/O channel status in a UDP message.
You can configure up to four sets of IP address entries (each entry consisting of a start and end IP
address range) to broadcast I/O status data. The broadcast frequency of the UDP packets to the
configured UDP IP addresses can be defined to accommodate network traffic and monitoring PC
application requirements. For details of the UDP I/O datagram see
You can configure up to four sets of IP address entries (each entry consisting of a start and end IP
address range) to broadcast I/O status data. The broadcast frequency of the UDP packets to the
configured UDP IP addresses can be defined to accommodate network traffic and monitoring PC
application requirements. For details of the UDP I/O datagram see
Field Descriptions
Configure the following parameters:
Enable UDP
Broadcast of I/O
Broadcast of I/O
Status
Enables/disables UDP broadcast of I/O channel status (data).
Default: Disabled
Default: Disabled
Broadcast Interval Enter the interval, in seconds, for UDP broadcasts of I/O channel status (data).
Range: 1-9999
Default: 30 seconds
Default: 30 seconds
Settings Button
Click this button to configure the UDP IP addresses that will receive the I/O
status information.
for field descriptions for the I/O UDP Settings window.