Actron 9640 User Manual

Scan tool displays a NO RECORDING PRESENT message if recording does 

not exist. Otherwise, press 

ENTER to play back recording. Scan tool plays back 

Entire Data List or Custom Data List, depending on how data was recorded.

The Playback has three lines of data 

and one line for frame number and 

timestamp (in seconds). 

Negative frames and timestamps indicate data recorded before trigger event. 

Positive frames and timestamps indicate data recorded after trigger event.

of list is reached when only 

]

 (up) icon is visible. 

Use 

LEFT/RIGHT arrow keys to scroll back and forth through frames. The 

RIGHT arrow key goes to next frame, “wrapping around” to earliest frame when 

final frame is reached, 

LEFT arrow key goes back to previous frame, again 

“wrapping around” to final frame.

✓

Different vehicles communicate at different speeds and support a different

number of PIDs. Therefore, maximum number of frames that can be

recorded will vary.

✓

Some vehicles wait a long period of time to store a trouble code after

driveability problem occurs. If operator selected “Trigger On Codes” when

making recording, operator might not see any drastic change in data

parameters before and after trigger point. In cases like this, user can

manually trigger recording when symptoms are observed.

When done, press 

BACK to return to Review Data or OBDII Function List.

MIL STATUS($10)

ON

MIL STATUS($1A)

ON

ABSLT TPS(%)($10)

35[

FRAME: 1 TM: 4.4

~