Fujitsu FI-5650C User Manual

1-4

    

For details, refer to the "FUJITSU TWAIN32 
Scanner Driver User’s Guide", provided in the 
Setup CD-ROM, and the "fi-5650C Operator's 
guide", provided in the User Manual CD-
ROM. 

The following shows the indications on the 
Function No. display.

8
Blinks only one time upon turning on the scanner.

 P
Indicates that the scanner has been turned ON and is 
being initialized.

 0
Indicates that initialization will soon be completed.

 1
Indicates that initialization has been completed 
successfully. 
This status is called "Ready Status".

 U
Indicates that a temporary error (that users can solve) 
has occurred during the initialization or scanning of 
documents. 
"U" and an error number (0, 1, 2, 4) are displayed 
alternately. To return the scanner to the ready status 
("1"), press the "Scan" or "Send to" button while the 
error is indicated.

 E
Indicates that a device alarm (that users cannot solve) 
has occurred during the initialization or scanning of 
documents. 
"E" and an "alarm code" (a number or letter) are 
indicated alternately. To return the scanner to the 
ready status ("1"), press "Scan" or "Send to" button 
while the alarm is indicated. 
If this alarm occurs, turn the power off and then on 
again. If the alarm is indicated after turning on the 
power again, contact an authorized FUJITSU scanner 
service provider.

(1)LED 

Lights when the scanner 

is turned ON.

(2)

Function No. display

Indicates the function No. 

and error status. 

Buttons

(3)

Function

Changes the Function 

activated by the Send to 

button .

(4) Send to

Launches the linked 

application software

(5)Scan