GenTran 5.1 User Manual

Copying Partner Profiles

Using Partners

Gentran:Server for Windows – November 2005

Gentran:Server for Windows User’s Guide

3 - 90

6

On the Partner Copy dialog box, type a unique profile identifier in the 
Profile ID box.

7

In the Name box, type the partner name.

8

In the EDI Code box, type the EDI identifier for this partner.

Note
The system uses this identifier during inbound processing to select 
the correct partner.

9

If necessary, in the Application Code box, type an application code to 
identify this partner.

Note
The system uses this identifier during outbound import processing to 
select the correct partner.

10

Select the appropriate mailbox from the Default Mailbox list.

Note
See the Communications User’s Guide for more information.

11

Complete the appropriate boxes in the enveloping section of the 
dialog box.

◗

You should only complete those boxes that are necessary for the 
standard the copied partner profile uses. The standards are listed 
to the right of each box. 

◗

If the partner profile you copied uses a standard, you must 
complete all the necessary enveloping boxes for that standard. If 
you do not complete the necessary boxes for the standard, the 
system takes the necessary information from the copied partner 
profile envelope.

Example
If the copied partner profile uses the UCS standard, you must 
complete the Interchange Communication ID box, among others.

12

After you enter all the partner information, click Save.

System response
The system displays the Outbound Interchange Entry Dialog Box.

(Continued on next page)