GenTran 5.1 User Manual

Gentran:Server for Windows User’s Guide

Gentran:Server for Windows – November 2005

Using Partners

Inbound Interchange Entry Dialog Box

3 - 33

Last Used 
Control Number

Specifies a value that will be used to sequence check the 
next interchange control number. The number will be 
replaced by the control number on the last interchange 
received. This box will initially be set to zero.

Note
This box is disabled if Sequence Checking is None.

Acknowledge 
Interchange

Instructs the system to send a functional acknowledgement 
to this trading partner when you receive the interchange set 
defined in this relationship. The default value for this box 
is not checked (do not expect an acknowledgement).

Ack Translation 
Set ID

Select the acknowledgement you want generated for this 
interchange.

ANSI X12 = 997 Functional Acknowledgement
UCS/EDIA = 999 Acceptance/Rejection Advice
EDIFACT

= CNTRL

Interchange 
Transl. Obj.

Select a partner-specific Interchange Break Map 
translation object if this trading partner interchange 
deviates from the normal system behavior. You must select 
a translation object from this list if you want the system to 
perform partner-specific interchanging.

Warning
We strongly recommend that you do not change the 
translation objects in the Interchange Transl. Obj. and 
Acknowledge Transl. Obj. lists, unless you have a specific 
reason for doing so.

(Continued on next page)