GenTran 5.1 User Manual
Outbound Interchange Select Dialog Box
Using Partners
Gentran:Server for Windows – November 2005
Gentran:Server for Windows User’s Guide
3 - 50
Outbound Interchange Select Dialog Box
Introduction
The Outbound Interchange Select dialog box is used to select an existing
interchange definition to be associated with this relationship. It can also be used to
initiate the definition of a new interchange, or to modify or delete an existing
definition. The interchanges available to you are determined by the version you
selected on the Outbound Relationship dialog box. Interchanges are required for
EDIFACT, ODETTE, TRADACOMS, and UCS, and are optional for ANSI X12
and TDCC.
interchange definition to be associated with this relationship. It can also be used to
initiate the definition of a new interchange, or to modify or delete an existing
definition. The interchanges available to you are determined by the version you
selected on the Outbound Relationship dialog box. Interchanges are required for
EDIFACT, ODETTE, TRADACOMS, and UCS, and are optional for ANSI X12
and TDCC.
Diagram
The following illustrates the Outbound Interchange Select dialog box:
Parts and
functions
The following lists the parts of the Outbound Interchange Select dialog box and
their functions:
their functions:
Part
Function
Interchanges
Displays all interchange definitions established for this
trading partner.
trading partner.
Select
Selects the indicated interchange to be used with this
relationship.
relationship.
Note
Select <none> if the standard you are using does not
require interchanges and you do not want to use one.
Select <none> if the standard you are using does not
require interchanges and you do not want to use one.
Exit
Exits the Inbound Interchange Select dialog box.
New
Displays the Outbound Interchange Entry Dialog Box,
which allows you to create a new interchange.
which allows you to create a new interchange.
(Continued on next page)