Honeyware VX6 User Manual
Connecting Bluetooth Devices
Before connecting to Bluetooth Devices:
l
The system administrator has discovered, paired, connected and disconnected (using LXEZ Pairing Control Panel)
Bluetooth devices for each VX6.
Bluetooth devices for each VX6.
l
The system administrator has enabled and disabled LXEZ Pairing parameters for the VX6.
l
The system administrator has also assigned a Computer Friendly Name using LXEZ Pairing Control Panel for the VX6.
To connect Bluetooth devices, the VX6 should be as close as possible and in direct line of sight (distances up to 32.8 feet or 10
meters) with the targeted Bluetooth device during the discovery and pairing process.
meters) with the targeted Bluetooth device during the discovery and pairing process.
If the devices are in Suspend, tap the power key to wake the VX6.
Using the correct procedure, wake the targeted Bluetooth device if necessary.
There may be audible or visual signals as both devices discover and pair with each other.
Taskbar Connection Indicator
VX6 is connected to one or more of the targeted Bluetooth device(s).
VX6 is not connected to any Bluetooth device.
VX6 is ready to connect with any Bluetooth device.
VX6 is out of range of all paired Bluetooth device(s). Connection is inactive.
VX6 is ready to connect with any Bluetooth device.
VX6 is out of range of all paired Bluetooth device(s). Connection is inactive.
There may be audible or visual signals from paired devices as they move back into range and re-connect with the Bluetooth
hardware in the VX6.
hardware in the VX6.
2-11