Netcomm NS370W User Manual
14
NS370 / NS370W User Guide
YML814 Rev1
Web Configuration Utility
You can access and manage the Internet Camera through:
1) a web browser, and 2) the enclosed
software IPView Pro. This chapter describes the Web Configuration Utility, and provides the
instructions on using the camera with a web browser.
instructions on using the camera with a web browser.
Accessing the Camera with the Web Configuration Utility
The Internet Camera must be configured through its built-in Web-based Configuration. From the
web browser, enter the default IP address to access the Welcome screen of the Internet Camera. To
configure your Internet Camera, type http://192.168.0.20 in the address box. The number is the
default IP address of your Internet Camera. Then, press [Enter].
web browser, enter the default IP address to access the Welcome screen of the Internet Camera. To
configure your Internet Camera, type http://192.168.0.20 in the address box. The number is the
default IP address of your Internet Camera. Then, press [Enter].
NOTE:
The computer’s IP address must correspond with the camera’s IP
address in the same segment for the two devices to communicate.
For example, you can change the IP address of your PC to
192.168.0.10 in order to access the camera.
address in the same segment for the two devices to communicate.
For example, you can change the IP address of your PC to
192.168.0.10 in order to access the camera.
Welcome Screen of the Configuration Utility
After the default IP address is entered from the browser, the Internet Camera Welcome screen
will appear with a still image. There will be three options to choose from to set-up and view your
Internet Camera, including:
will appear with a still image. There will be three options to choose from to set-up and view your
Internet Camera, including:
• View
Video
–
ActiveX
Mode
• View
Video
–
Java
Mode
• System
Administration