Sony SNT-V304 User Manual

15

• When an alarm event occurs while the pop-up

window is displayed, the time set for the [Alarm
duration] is extended. A second pop-up window will
not appear.

[Upload (FTP)] settings are made through dialog boxes
that are displayed for [Input 1] (Video Input 1) to
[Input 4] (Video Input 4).

Primary Time
Enabled

Always

Restricted
Between

Start

Stop

Mon to Sun

Primary Image
Frequency

Take Pictures

Secondary Time
Enabled

Secondary Image
Frequency

Take Pictures

Host Name

User Name

Password

Use Passive Mode

FTP Port Number

Upload Path

Base File Name

FTP transfer is enabled when this box
is checked.

FTP transfer is always enabled when
this radio button is selected.

Alarm input is enabled for a specific
time of day when this radio button is
selected.

When the [Restricted Between] radio
button is selected, enter the start time
here.

When the [Restricted Between] radio
button is selected, enter the stop time
here.

Check the boxes to specify particular
days on which the FTP transfer should
be enabled.

Sets the FTP image transfer interval.
Select any of seconds, minutes, or
hours, then input the time (a numerical
value).

Selects the FTP transfer conditions.

Select this check box to enable alarm
input when outside the time range set
with [Primary Time Enabled].

Sets the FTP image transfer interval.
Select any of second, minute or hour,
then input the time (a numerical value).

Selects the FTP transfer conditions.

Enter the host name of the transfer
destination.

Enter the user’s name on the host at
the transfer destination.

Enter the password of the above user.

To use Passive mode, select this
check box.

Enter the port number.

Enter the path of the save destination
for image files sent by ftp to a host.

Enter the file name prefix (the fixed
part of the file name) to be assigned to
image files sent.

Overwrite

Date/Time Suffix

Sequence Number
Suffix set to
Maximum

Sequence Number
Suffix up to:

To always overwrite the same file
name, select this radio button.

Select this radio button to append the
date and time to the base file name.

Select this radio button to append a
sequential number to the prefix.

When appending a sequential number
to the prefix, select this radio button
and enter a value to specify a
maximum for the number.

Taggle

Timed duration

Select this radio button to activate or
deactivate relay output by clicking the
[RELAY] button.

Select this radio button and enter the
relay output activation time in the box
to activate timed relay output by
clicking the [RELAY] button. You can
set this between 1 and 30 seconds.

To control relay output with the [RELAY] button, you
must make settings that keep the alarm input from
activating or deactivating relay output.  Select [Alarm]
using the “Layout and Application Wizard” (see page
13) and set [Relay-OUT at Alarm] to [Disable].

The 

 (Network Settings) icon is used for settings

related to the supporting network protocol. Clicking
the “Network Setting”s icon displays the following
screen.