Sony SNT-V304 User Manual

30

1

Clicking this 

 / 

 icon switches the image size

between [Fullsize] and [Hugesize].

2

Controls tilt (up/down movement) of the video camera.

3

Controls pan (left/right movement) of the video
camera.

4

Controls zooming of the video camera.

5

Controls the diaphragm (or Iris) of the video camera.

6

Sets the auto-focus on the video camera.

7

Controls the focus of the video camera.

8

Controls the camera relay units. The following start
commands are issued each time you click each button
and a stop command is issued when the button is
released.
[AUX 1] Button: Gate Open/OFF Start (Char3=42h)

Gate Open/OFF Stop (Char3=62h)

[AUX 2] Button: Gate Open/OFF Start (Char3=48h)

Gate Open/OFF Stop (Char3=68h)

[AUX 3] Button: Slow Start (Char3=4Ah)

Slow Stop (Char3=6Ah)

9

Returns the video camera to the home position.

When an EVI-D30/D31/G20/G21 is connected to a
serial port on the video network station, camera pan,
tilt and zoom can be controlled from the Web page.
The monitor screen must be set to the Single mode
Camera View: click one of the [CAM1] to [CAM4]
buttons, if necessary, to change to the Single mode
Camera View. The Pan/Tilt/Zoom control bars and
buttons are displayed around the video source image in
the Single mode.

z

• The Pan/Tilt/Zoom functions described here are not

available if disabled by the system administrator.

• Items 5 through 8 of the screen below appear only

when the Kalatel driver is set as the pan/tilt driver.

8

3

2

4

1

9

6

7

5