Wacom DTK-2200 User Manual

Page of 111
21
21
PEN FEATURES
Important: 
Use only the pen that came with your product, or a Wacom accessory pen specified for use with 
Cintiq.  Other pens may not function properly.  See 
.  Also, the Cintiq 
pen tip is specifically designed for use with the Cintiq pen display.  The tips on other pens could 
damage the Cintiq display screen.
When not in use, place the pen in the pen stand or lay it flat on your desk.  To maintain the 
sensitivity of your pen, do not store it in a container where it will rest on the tip or eraser.  
Improper storage may damage pen tip pressure sensor(s).
Eraser: When brought within proximity of the pen display screen, 
the tablet portion of the display reports the pen location.  
Pressure information is reported as you press down on the eraser.  
By default, the function is set to E
RASE
.
Side switch: Be sure the customizable side switch is in a convenient 
location where you can toggle it with your thumb or forefinger but not 
accidentally press it while using the pen.
You can use the switch whenever the pen tip is within proximity of the 
display screen.  You do not need to touch the pen tip to the display 
surface.
Toggle the switch in either direction to activate the button functions.  
By default, the upper switch is set to D
OUBLE
 C
LICK
 and the lower 
switch is set to R
IGHT
 C
LICK
.
Pen tip (replaceable nib): The pen activates as soon as it is brought 
within proximity of the pen display screen.  This allows you to 
position the screen cursor without touching the pen tip to the 
display screen.
When pressure is applied to the pen tip, the pen simulates a primary 
mouse button click.  Tip click pressure can be adjusted in the 
Wacom Tablet control panel.
Tips:
The pen enters proximity when the tip or eraser is brought 
within 5 mm (0.2 inch) of the pen display screen surface.
To resume operations after the pen display has entered auto 
sleep mode, bring the pen tip within proximity or touch the 
pen tip on the pen display screen.