Wacom DTK-2200 User Manual
70
70
TESTING THE HARDWARE CONTROL BUTTONS
1. With the D
IAGNOSTICS
dialog box open, observe the T
ABLET
I
NFO
column as you test each of the three
hardware control buttons located on the upper front of your interactive pen display. Be sure to select
the pen display you are testing from the T
the pen display you are testing from the T
ABLET
I
NFO
column.
2. Test the buttons by pressing them one at a time. Each time you press a button, its number is shown
next to the either the L
EFT
B
UTTONS
or R
IGHT
B
UTTONS
category.
3. When you are done, click the
C
LOSE
button to exit the dialog box.
TESTING THE EXPRESSKEYS
1. With the D
IAGNOSTICS
dialog box open, observe the T
ABLET
I
NFO
column as you test each ExpressKey.
Be sure to select the pen display you are testing from the T
ABLET
I
NFO
column.
2. Test the keys by pressing them one at a time. Each time you press a key, its number is shown next to
either the L
EFT
B
UTTONS
or R
IGHT
B
UTTONS
category, depending on which keys group you are testing.
3. When you are done, click the
C
LOSE
button to exit the dialog box.
Important: Some applications can override and control the ExpressKey functions. Consider closing
any open applications except the Wacom Tablet control panel when testing the ExpressKeys.
For details, see
any open applications except the Wacom Tablet control panel when testing the ExpressKeys.
For details, see
.
TESTING THE TOUCH STRIPS
1. With the D
IAGNOSTICS
dialog box open, observe the T
ABLET
I
NFO
column as you test each Touch Strip.
Be sure to select the pen display you are testing from the T
ABLET
I
NFO
column.
2. Slide your finger up or down along the entire length each Touch Strip. A number is shown next to either
the L
EFT
T
OUCH
or R
IGHT
T
OUCH
category, depending on which Touch Strip you are testing.
3. Press the corresponding Touch Strip Mode button for the Touch Strip you are testing. This will toggle
between the customizable states of the Touch Strip. As you toggle, an overlay will appear briefly on
your display screen to show the function assignments. Within the D
your display screen to show the function assignments. Within the D
IAGNOSTICS
dialog box, the button
state will also be shown.
If any of the functions are set to S
KIP
, that function will be skipped in the toggle sequence.
4. When you are done, click on the C
LOSE
button to exit the dialog box.
Important: Some applications can override and control the Touch Strip functions. Consider closing
any open applications except the Wacom Tablet control panel when testing the Touch Strip.
For details, see
any open applications except the Wacom Tablet control panel when testing the Touch Strip.
For details, see
.