Omega CNiS16D User Manual

Press 

d

12) Display flashes previous selection of 

GROS Gross or PEAK

Peak.

Press 

b

13) Scroll through the available selection 

GROS or PEAK to the

selection of your choice.

Press 

d

14) Display shows 

STRD stored message momentarily and then

advances to 

RDG Reading Configuration Menu.

If 

GROS was selected, in the Run Mode pressing b button causes the

display to flash Gross value (value measured without zeroing of the
display).
If 

PEAK was selected, in the Run Mode pressing b button causes the

display to flash Peak value.

0 - 20 mA current input used for process control only.
For 4 - 20 mA Input select 0 - 20 mA and adjust the Input/Reading
accordingly. To adjust 4 - 20 mA input, see example under
INPUT/READING Submenu.

19

It

is required that you put the controller in the Standby Mode

for any configuration change other than Set Points & Alarms.