Emerson CMF200A User Manual

6

Determining a Location 

Choose a location for the sensor based on the requirements described in this section. The following general 
guidelines can help you select an appropriate location for the sensor.

For optimal performance, the sensor tubes should remain full of process fluid.

Make sure the hazardous area specified on the sensor approval tag is suitable for the environment in which the 
sensor is installed. (See Figures 1–4.) For installation in an area that requires intrinsic safety, refer to the 
appropriate Micro Motion approval documentation, shipped with the sensor or available from the 
Micro Motion web site at www.micromotion.com. 

The ambient and process temperature limits of the sensor are shown in Figures 5 and 6:

• For ELITE sensor models other than high-temperature and extreme-high temperature models, see 

• For high-temperature and extreme high-temperature ELITE sensors, see Figure 6.

Purge connections 
(optional)

Calibration tag

Approval tag

Process connection

Flow direction

arrow

Flexible conduit

Transmitter, core processor,

or junction box

(Model 2400S transmitter

shown)