Lenmar Enterprises PPLIKSALL User Manual

Model: PPUKSALL

Kickstand Battery 2.0

For iPhone® & iPod®

PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS PRODUCT. IT CONTAINS IMPORTANT 

OPERATING INSTRUCTIONS FOR YOUR UNIT.

Thank you for purchasing the Kickstand Battery 2.0. The Kickstand Battery 2.0 offers the convenience of an 

external battery built into a portable iPhone/iPod kickstand. 

You can use it at your desk as a Kickstand with the ability to charge your iPhone/iPod whenever you like or fold 

it up and take it with you and still enjoy the benefit of extra battery power when you need it.

Included in the package you have purchased:

Kickstand Battery 2.0, USB charging / Sync cable and Owner’s manual.

Your Kickstand Battery 2.0 will always drain first until its remaining power is at 5%; then your iPhone/iPod 

switches to its main battery.

The integrated LED status indicator shows how much battery power is left in your 

case. Simply press the ON / OFF button. The 1st LED will indicate between 20 - 40% 

charge remaining, the 2nd LED will indicate between 40 – 60% charge remaining, 

the 3rd LED will indicate 60 - 80%  charge remaining, and the 4th LED will indicate 

80 -100% charge remaining.

Enjoy the convenience of syncing your iPhone/iPod without ever 

removing the Kickstand Battery 2.0. Using the supplied Micro USB cable 

you can charge and sync your iPhone/iPod to iTunes® without ever 

removing it. Just plug the Micro USB cable into the Kickstand Battery 2.0 

and the other end into your computers USB slot.

Note: Prior to initial use fully charge your Kickstand Battery 2.0 before 

connecting to your iPhone/iPod.

You can charge the Kickstand Battery 2.0 with the Micro USB to USB 

cable included with the Kickstand Battery 2.0. Plug the Micro USB into 

the Kickstand Battery 2.0’s micro USB port, and the other end into a 

computer’s USB port or into a wall plug style adapter that has a USB port. 

The LED status indicators show the current charging status of the case. 

From left to right, the LEDs will blink and become steady as the 

Kickstand Battery 2.0 charges. Once the 4th LED has become steady, the 

charging process has finished. 

If the Kickstand Battery 2.0 is connected to the iPhone/iPod and also 

plugged into a USB port, charging is as follows:

First the iPhone/iPod will receive about 3 hours of charge and then the 

Kickstand Battery 2.0 will charge for about 4 hours until full.

With the built in “ON / OFF” button you have the option of using the 

Kickstand Battery 2.0 when you need it. When you need an extra charge 

in your phone just push the ON/OFF button and hold for two seconds to 

turn on and the Kickstand Battery 2.0 will proceed to charge your 

iPhone/iPod’s main battery. When you are ready to turn it off just hold 

the button again for two seconds and the Kickstand Battery 2.0 will shut off.

With your iPhone/iPod facing you, slide your iPhone/iPod into the 

Kickstand Battery 2.0 from the top making sure the 30 pin connector and 

the bottom of the iPhone/iPod line up and connect correctly. 

Once in place you can push the ON / OFF button located on the back of 

the Kickstand Battery 2.0 once, turning it on. You should now see the 

charge indicator icon appear on your iPhone/iPod.

Lenmar product is warranted to be free of defective parts and workmanship for stated period from the original date of purchase. Warranties are not transferable. 

The warranty excludes damage resulting from accident, misuse, modification, delay or loss of use, damage to equipment or by normal wear and tear.

ALL WARRANTY REQUESTS MUST BE SUBMITTED AT: www.lenmar.com/warranty

INCLUDE A COPY OF ORIGINAL PROOF OF PURCHASE WITH RETURNED BATTERY OR THE CLAIM WILL BE DENIED.

Copy of Proof of Purchase from an authorized Lenmar Dealer must include the following:

- The company where the product was purchased

- The date of purchase

- The model number of the product purchased

- Send back the product freight prepaid (we recommend insuring the package as Lenmar will not be responsible for shipments lost or damaged in transit).

Include $10.00 payable to Lenmar Battery Solutions for processing fee for ship to address in the Continental United States. 

Include $15.00 for ship to address in Hawaii, Alaska or Canada.

Send to:

Lenmar Battery Solutions

Attn: Return Department

4035 Via Pescador

Camarillo, CA 93012-5050

Use preprinted Lenmar shipping label or clearly print your RA Number on the outside of the shipping carton.

The following statement is required in the state of California pursuant to the settlement of an action brought by the Mateel Environmental Justice Foundation against 

multiple electronics and appliance manufacturers

For additional questions, comments or to explore other Lenmar battery solutions, visit our web site at: www.lenmar.com or call 800/424-2703 from 9AM – 5PM PST.

Cell type: Lithium-Polymer Battery

Input:  DC 5V, 500mA

Output: DC 5V, 1A

Capacity: 2000mAh

Dimensions: L90 x W57 x T11mm

Weight: 70g 

Compatibility: iPhone 2G/3G/3GS/4 and most iPods

Standby: Up to 350 hours*

Talk Time:  Up to 7 hours and on the 3G network, up to 14 hours on the 2G Network.

Internet Use: Up to 6 hours and on the 3G network, up to 10 hours on Wi-Fi

Audio Play: Up to 45 hours*

Video Play: Up to 10 hours*

*All above times may vary due to device settings, location, and signal strength

311-321-33-0629 r1 y1

Lithium-Polymer battery must be

recycled or disposed of properly.

USB

MICRO USB

PORT

MICRO USB

PORT

1st 2nd 3rd 4th

LED STATUS

INDICATOR

LED STATUS

INDICATOR

APPLE 30 PIN

CONNECTOR

ON/OFF

BUTTON

SLIDE