GE GSD4410 User Manual

Drain is blocked. This
indicates that the drain

is so clogged that the 
dishwasher cannot 
continue to operate in
a satisfactory manner.
Dishwasher will stop.

Drain sensor is not

If 

repeats for the next cycle, call 

functioning. 

for service.

Dishwasher will 
continue cycle along 
with a fixed drain period.

There is too much water
in the dishwasher.

Press the RESET pad to stop the beep. 

Locate and remove the blockage in the

drain system. To pump any remaining

water out of the machine:

Latch the door.

Select any cycle.

Touch START and then immediately 

touch RESET.
NOTE: 

Warranty service does not 

cover household drain problems.

Press the RESET pad to stop the beep. 

The dishwasher is designed to

automatically pump out extra water as

long as the door is latched. When you

hear the motor stop running:

Unlatch the door and see if all the 

water is gone.

If you see water entering the 

dishwasher, close and latch the door. 

Shut off the water supply to the 

dishwasher.

If water is gone and no water is 

entering the dishwasher, restart cycle.

If 

repeats, shut off the water 

supply to the dishwasher. Call for 

service.

13