GE GSD6300 User Manual

– 19 –

through the hub to the lower spray arm and to the
main conduit.  The main conduit supplies water to
the middle and upper spray arms.

Inlet Cover

Caution: Use care to avoid breaking the clip on
the hub when removing the main conduit from hub.

Remove the lower wash arm and main conduit to
gain access to the inlet cover and sump.

Fine Filter, Sump Filter, and Sump

The dishwasher must be removed from its instal-
lation to gain access to the sump.  The sump
must be removed to allow removal of the fine filter
and sump filter.

Circulation Pump

Note: It is extremely important that the self-tapping
ground-wire screw on the circulation pump is
tightened securely.

The dishwasher must be removed from its instal-
lation to gain access to the circulation pump.  The
circulation pump can be activated using service
mode (refer to the 

 chapter).  Refer to

schematic or strip circuit for motor resistance
value.

Lower Wash Arm

Lift and rotate (ccw) the lower spray arm to re-
move it from the hub.  Clean the screen on the
water return if necessary.

Middle Wash Arm

Refer to illustration for disassembly.

Upper Wash Arm

Remove screw, plastic bearing, and upper wash
arm.

Conduit Carrier

Hub

Middle

Spray

Arm

Mid

Bracket

Nut

Bearing

Upper Rack

Tab

Mid Conduit

Screw

(Optional)

y arm for bits of

her foreign

or rotation.

CIRCULATION PUMP

J2-1

M

WR

NX

10

NO

COM

WX

DOOR

INTERLOCK

N