Jackson R24 User Manual
5. Using the 3/8” nutdriver, remove the nuts securing the heater
wires to the heater. Then carefully pull the wires out of the way.
wires to the heater. Then carefully pull the wires out of the way.
6. Next, use the ratchet and 1/2” socket to remove the heater
mounting nuts.
mounting nuts.
7. Removing the heater may require that you reach into the wash
tank, grasp it and try give it a push out of the wash tank.
tank, grasp it and try give it a push out of the wash tank.
8. Once the heater is pushed away from the tank wall, pull it out
with your hands.
with your hands.
www.jacksonmsc.com
Heater Replacement Instructions
Revision A (09/23/2005)
Revision A (09/23/2005)
3
Removing upper (wash) strainer.
Reaching into the wash tank.
Pulling the heater out.
Removing the heater gasket
Removing the heater nuts.
Using the ratchet to remove the heater mounting nuts.