KitchenAid KUDS01FL User Manual

Page of 44
14
Cycle Selection Charts
Select the wash cycle and options desired. Or press START to 
repeat the same cycle and options as the previous cycle.
NOTE: If the last cycle you completed was a rinse cycle, the 
dishwasher will run the last full wash cycle and options that you 
selected when you press Start. 
If the power is off or the door is open for an extended period 
of time, the Start button memory will default to the Normal 
cycle with heated drying.
If you do not run the dishwasher daily, close the door to 
maintain memory.
A “●” shows what steps are in each cycle. 
Temperatures indicate where extra heat is added.
Water usage is shown in U.S. gallons/liters.
This model meets the E
NERGY
 S
TAR
®
 guidelines for energy 
efficiency.
Cycle time includes dry time. An asterisk ( * ) by the cycle time 
indicates the cycle time might be longer depending on the 
temperature of the water entering the dishwasher. The cooler the 
water, the longer the cycle time. If the water is already hot 
enough, the cycle time will be as shown.
A small amount of water is run through the pump to remove 
soil particles between the main wash and final rinse.
NOTES: 
The sensor in your dishwasher monitors the soil level. Cycle 
time and/or water usage can vary from the numbers above as 
the sensor adjusts the cycle for the best wash performance.
In the Normal cycle, the dishwasher pauses while soaking. 
Soaking helps loosen soils on dishes for brilliant results.
Use this cycle for hard-
to-clean, baked-on, 
cookware and harder than 
normal water conditions.
Use both detergent 
dispenser 
sections.
Soil 
Level 
Sensed
Pre-
Wash
Main 
Wash
Rinse
Rinse
Final 
Heated 
Rinse
Dry
Time
(min)
Water 
Usage
(gal/L)
Heavy
130°F 
(54°C)
145°F 
(63°C)
160°F 
(71°C)
98*
8.8-
10.4/
33-39
Light
130°F 
(54°C)
145°F 
(63°C)
160°F 
(71°C)
91*
6.9/26
Use this cycle for loads with 
normal amounts of food 
soil. (The energy-usage 
label is based on this cycle.)  Use both detergent 
dispenser 
sections.
Soil 
Level 
Sensed
Pre-
Wash
Main 
Wash
Rinse
Rinse 
or 
Purge†
Final 
Heated 
Rinse
Dry
Time
(min)
Water 
Usage
(gal/L)
Heavy
 
140°F 
(60°C)
140°F 
(60°C)
94*
7.5-8.8/
28.3-
33.3
Light
120°F 
(49°C)
140°F 
(60°C)
79*
5.9/
22.3
Use this cycle for china and 
crystal. This cycle uses a 
light wash and gentle dry. 
During the heated dry, the 
heating element cycles on 
and off.
Use main 
detergent 
dispenser section.
Soil 
Level 
Sensed
Rinse
Main 
Wash
Rinse
Purge†
Final 
Heated 
Rinse
Dry
Time
(min)
Water 
Usage
(gal/L)
Heavy
120°F 
(49°C)
135°F 
(57°C)
79*
7.1-8.6/
27-33
Light
120°F 
(49°C)
135°F 
(57°C)
71*
5.9/
22.3
Use this cycle for a quick wash 
and light dry to cleanup 
cookware prior to entertaining. 
The sensor adds water and 
time to the cycle, if needed, for 
maximum cleaning. This cycle 
uses a shortened dry time. 
Towel drying may be needed.
Use main 
detergent 
dispenser 
section.
Water 
Temp 
Sensed
Rinse
Main 
Wash
Rinse
Final 
Heated 
Rinse
Dry
Time
(min)
Water 
Usage
(gal/L)
Hot
44*
5.2-6.5/
20-25
Cold
48*
7.1-8.2/
27-31
Use this rinse cycle for 
rinsing dishes, glasses, and 
silverware that will not be 
washed right away.
Do not use 
detergent with 
this cycle.
Soil 
Level 
Sensed
Pre-
Wash
Rinse
Main 
Wash
Rinse
Final 
Heated 
Rinse
Dry
Time
(min)
Water 
Usage
(gal/L)
 
10
1.8/7