Jenn-Air W10596272A User Manual

Page of 65
12
Flexible Tines
The row of tines on the left-hand and 
right-hand sides of the top rack can 
be adjusted to make room for a 
variety of dishes.
To adjust the fold-down tines:
1. 
Grasp the tip of the tine that is in 
the tine holder.
2. Gently push the tine out of the 
holder.
3. Lay the tines down, toward the 
center of the rack.
NOTE: The bottom rack may also have 1 or 2 rows of flexible tines 
located in the back of the rack. Follow the same instructions to 
adjust. 
Light Item Clips
The light item clips hold lightweight plastic items 
such as cups, lids, or bowls in place during 
washing.
To move a clip:
1. 
Pull the clip up and off the tine.
2. Reposition the clip on another tine.
Premium Adjustable 2-Position Top Rack
After removing the 
culinary tool rack, you 
can raise or lower the 
top rack to fit tall items 
in either the top or 
bottom rack. 
Adjusters are located 
on each side of the 
top rack. Each 
adjuster has 2 preset 
positions. 
To raise the rack,
 
press both rack adjusters and lift the rack until it is in the Up 
position and level.
To lower the rack, press both rack adjusters and slide the rack to its 
Down position and level.
Manual Adjustable 2-Position Top Rack
You can raise or 
lower the top 
rack to fit tall 
items in either the 
top or bottom 
rack. Adjusters 
are located on 
each side of the 
top rack. Raise 
the top rack to 
accommodate 
items up to 9" 
(22 cm) in the top rack and 13" (33 cm) in the bottom rack, or lower 
the top rack to accommodate items up to 11" (28 cm) in both the 
top and bottom racks.
IMPORTANT: Remove dishes prior to removing the top rack from 
the dishwasher.
To raise, remove rack and slide lower wheels into the rails as 
directed in “Removable Top Rack” section.
To lower, remove rack and slide upper wheels into the rails as 
directed in “Removable Top Rack” section. 
Removable Top Rack (for Roller Glide Rails)
The removable top rack allows you to wash larger items such as 
pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack from 
dishwasher.
To remove the rack
To gain access to the track stops, pull the upper rack forward 
about halfway out of the tub.
To open, flip the track stop toward the outside of the tub. 
After opening both track stops, pull top rack out of the rails.
Removable Top Rack (for Ultra Glide rails) 
The removable top rack 
allows you to wash larger 
items such as pots, roasters, 
and cookie sheets in the 
bottom rack.
IMPORTANT: Remove 
dishes prior to removing the 
top rack from the 
dishwasher.
To remove the rack:
To gain access to the 
removable tabs on the 
tracks/rails, pull the upper 
rack forward about halfway out of the tub.
On one side, press the tab on the track in and pull up the front end 
of the rack out of the track. Then repeat this step on the other side 
to completely remove the front end of the rack.   
Then remove the back end of the rack, by pulling the back end out 
with a slightly forward then upward motion.
To replace the rack:
Pull the tracks forward about halfway out of the tub.
Along the sides of the racks are round attachment tabs. Align the 
rack's back end attachment tabs with the cutout in the track. Push 
down into place.
Pull the tracks completely out, and align the rack's front end 
attachment tabs with the cutout in the track. Push down into place. 
You will hear a snap when the front end of the rack is secured into 
place on each side. 
Track stop closed
Track stop open