Homesmart Appliance SRS-LYNC-M-DUAL User Manual
APPENDIX C
REMOTELY MANAGING YOUR ROOM SYSTEM USING INTEL AMT
REMOTELY MANAGING YOUR ROOM SYSTEM USING INTEL AMT
122
smarttech.com/kb/170450
After you connect to your room system, you can perform all of the administrative tasks described
in this guide, including restarting the room system in administrator mode and making configuration
changes in Lync Admin Console and SMART Settings.
NOTE
When you connect to a room system using remote access software, an orange and yellow
border appears around the room system’s screens and an icon flashes in the top-right corner to
indicate to anyone in the room that you’re accessing the room system remotely.
To connect to your room system using DameWare
1. Start DameWare.
2. Click Connect.
The
Remote Connect window opens.
3. Type the IP address for the room system in the
Host box.
4. Type admin in the
User ID box.
5. Type the Intel AMT password you specified in
Password box.
6. Select Use Intel AVT KVM.
7. Click Connect.
8. Press F1, and then press ENTER to select the room system display you want to view.
NOTE
If you want to view a different display, you must disconnect from the room system and then
connect to it again.
To connect to your room system using VNC Viewer Plus
1. Start VNC Viewer Plus.
2. Select None in the
Encryption drop-down list.
3. Select Intel® AVT KVM in the
Connection Mode drop-down list.
4. Click Connect.
5. Type the Intel AMT user name (admin) and password you specified in
on page 120 when prompted.
6. Press F1, and then press ENTER to select the room system display you want to view.