Lennox Hearth 506033-13 Leaflet

HEARTH PRODUCTS

KITS AND ACCESSORIES

506033-13

REV. NC 12/2008

INSTALLATION INSTRUCTIONS FOR BRICK PANEL KITS

FOR USE WITH THE BELLA™ PELLET STOVE

BRICK PANEL KITS

BELLA™

Figure 2

Cat. #

Model

Description

H3484

BELLA-BPK-T

Brick Panel Kit, Traditional

KIT CONTENTS (See Figure 1)

1 ea. Left Side Brick Panel (item 1)

1 ea. Right Side Brick Panel (item 2)

1 ea. Back Brick Panel (item 3)

1 ea. Left Brick Panel Bracket (item 4)

1 ea. Right Brick Panel Bracket (item 5)

2 ea. 10-24 x 3/8” Socket Head Screws (item 6)

1 ea. Instruction Sheet

GENERAL INFORMATION

All of these parts may scratch and bend, great care should be used in

handling them.

If you encounter any problems, need clarification of these instructions or

are not qualified to properly install this kit, contact you local distributor

or dealer. Read this instruction sheet in its entirety before beginning the

installation. Failure to understand and follow these directions may result

in damage to the brick panels.

ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND OP-

ERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO THESE

INSTRUCTIONS.

TURN OFF THE STOVE AND ALLOW IT TO COMPLETELY COOL BEFORE

PROCEEDING.

INSTALLATION INSTRUCTIONS

Step 1. Open front glass door and remove burn-pot.

Step 2. Locate the socket head screw in the inside of the firebox (see Figure

2) and remove with 5/32” allen wrench.

Step 3. Repeat step 2 on opposite side.

Figure 1 - Kit Contents

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

TOOLS NEEDED

5/32” Allen Wrench