GE JP356SM Leaflet
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
†
Note: Check local codes for required
breaker size
Important: Requires a 5" free area
between the bottom of the cooktop to
any combustible material, i.e., shelving.
Free area not required when installing
wall oven underneath cooktop. Refer to
installation instructions. Requires a
15" minimum from cooktop to adjacent
overhead cabinets. Units are furnished
with a 48" flexible armored cable.
Important: Requires a 5" free area
between the bottom of the cooktop to
any combustible material, i.e., shelving.
Free area not required when installing
wall oven underneath cooktop. Refer to
installation instructions. Requires a
15" minimum from cooktop to adjacent
overhead cabinets. Units are furnished
with a 48" flexible armored cable.
Note: 30" Ribbon cooktops are approved for use over select GE
27"and GE 30" Single Wall Ovens and Warming Drawers. Refer to
cooktop and wall oven/warming drawer installation instructions
packed with product for current dimensional data. If installed
with a GE Profile
27"and GE 30" Single Wall Ovens and Warming Drawers. Refer to
cooktop and wall oven/warming drawer installation instructions
packed with product for current dimensional data. If installed
with a GE Profile
™
Telescopic Downdraft System, consult both
the cooktop and downdraft installation instructions packed with
product before installing. Cooktop gas/electric supply may need to
be re-routed to install downdraft. Consult cabinet
and countertop manufacturer’s specs for flush mount installation
priorto install.
product before installing. Cooktop gas/electric supply may need to
be re-routed to install downdraft. Consult cabinet
and countertop manufacturer’s specs for flush mount installation
priorto install.
Before installing, consult installation instructions
packed with product for current dimensional data.
KW Rating
240V
7.6
208V
5.7
Breaker Size
240V
40 Amps
†
208V
30 Amps
†
3-1/4*
Cooktop
2-1/2**
Required
28-1/2
19-5/8
29-7/8
30_ss_cktp_install.eps
21-1/2
Electrical junction box 16" MIN.
below countertop
30" MIN. to
unprotected
cabinet
Cut should
not interfere
with cabinet
structure
at front
1-1/2" MIN.
clearance to
side wall
from cut-out
1-1/2" MIN.
clearance to
side wall
from cut-out
1-3/4" to
rear wall
13" MAX.
depth
* Depth of unit at conduit connection location (rear) is
6-1/2" on models PP980/950 and 4-5/8" on models
PHP900/PP975/972/962/945/942/932/912,
JP655/356/346.
**Raised bull nose countertops may require up to
3/8" additional clearance to prevent interference
with curved front.
15" MIN.
to cabinet
Listed by
Underwriters
Laboratories
Dimensions and Installation Information (in inches)
321360
Specification Revised 12/07
JP356SM
GE
®
30" Built-In CleanDesign Electric Cooktop