GE AEW18* User Manual

4

The air conditioner controls are located behind the
control panel door. Press to open and close the door.

NOTE: The remote control will work with the control
panel door open or closed.

Turns air conditioner on and off. When
turned on, the display will show the room
temperature.

Shows the room temperature or time
remaining on the Delay timer. Shows the Set
temperature while setting the temperature in
Cool or Energy Saver modes. The Set light will
turn on while setting.

NOTE: The display will change to show the
room temperature after settings have been
made. To recall the Set temperature, press the
Temp Increase 

▲ or Decrease ▼ pads.

▲ 

▼ 

Use to set temperature when in Cool or Energy
Saver mode. The Set light will turn on while
setting.

▲ (+) /Decrease ▼ (–)

Each touch of the Increase 

▲ / Decrease ▼

pads on the unit or the Increase 

pads on the remote control will set the delay
time when using the Delay 1–24hr timer (

).

The Set light will turn on while setting.

Use to set the fan speed to Low, Med, High 
or Auto on the unit. NOTE: On the remote
control, use the fan speed Increase 

pads to set the fan speeds to Low,

Med or High. Use the Auto pad to turn Auto
fan on.

Use to set the air conditioner to Cool, Energy
Saver or Fan Only mode.

Delay ON—When the air conditioner is off, it
can be set to automatically come on in 1 to 24
hours at its previous mode and fan settings. 

Delay OFF—When the air conditioner is on, 
it can be set to automatically turn off in 1 to 
24 hours. 

Press the Delay 1–24hr pad on the unit or
the

pad on the remote control. Each touch

of the Increase 

▲ / Decrease ▼ pads on the

unit or the Increase 

pads on 

the remote control will set the timer in 
1-hour intervals. The Set light will turn on
while setting.

To review the remaining time on the Delay
1–24hr timer, press the Delay 1–24hr pad on the
unit or the

pad on the remote control. Use

the Increase 

▲ / Decrease ▼ pads on the unit

or the Increase 

pads on the

remote control to set a new time if desired.

To cancel the timer, press the Delay 1–24hr pad
until the light on the Delay 1–24hr pad goes off.

Turn on to provide continuous side-to-side 
air circulation.

For fixed side-to-side air direction, turn on
until the desired air direction is obtained, 
then turn it off.

Delay timer Increase

Circulaire

Auto Fan on/off

Fan speed Increase

Unit power on/off

The display always shows the room
temperature except when setting the
Set temperature or the Delay timer.

Light indicates the
delay timer is set.

Light indicates the unit
is in the temperature or
delay time Set mode.

Light indicates
Circulaire is on.

Delay 1–24hr

Delay timer 
Decrease

Mode select

Fan speed 
Decrease

Temperature 
set Increase 
and Decrease