Franke Consumer Products FCR 908 TC User Manual
EN
9
9
MAINTENANCE
REMOTE CONTROL (OPTIONAL)
The appliance can be controlled using a remote control powered
by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-
AAA type (not included).
• Do not place the remote control near to heat sources.
• Used batteries must be disposed of in the proper manner.
by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-
AAA type (not included).
• Do not place the remote control near to heat sources.
• Used batteries must be disposed of in the proper manner.
Metal grease filters
Metal filters can be washed also in a dish machine. They need to
be washed every time a drop-symbol appears in the display or at
least every two months. In case of very frequent use these have to
be washed even more often.
be washed every time a drop-symbol appears in the display or at
least every two months. In case of very frequent use these have to
be washed even more often.
Alarm reset
• Press the G-key for at least 2 seconds.
• Press the G-key for at least 2 seconds.
Cleaning
• Remove the filters one at a time holding them up with one
• Remove the filters one at a time holding them up with one
hand and pulling the handle downwards with the other hand at
the same time.
the same time.
• Wash the filters. Pay attention not to bend them. Make sure
that filters are completely dry before putting them into their
seat. (a possible modification of the filter surface doesn’t influ-
ence its efficiency).
seat. (a possible modification of the filter surface doesn’t influ-
ence its efficiency).
• Place the filters again into their seats and make sure that the
handle of the filter remains outside.